Wako Blog

Introducing a wide range of research topics, technical reports, and tips for your experiments.

Analytical Chemistry

Analytical Chemistry

Precautions in Pre-treatment of Environmental Water Samples by Chelating Resin Preconcentration Method

The original article by Dr. Eiji Fujimori of the National Environmental Research and Training Institute, Ministry of the Environment, appeared in an e-newsletter of FUJIFILM Wako and was translated by the company.

Inductively coupled plasma mass spectrometry (ICP-MS) is capable of simultaneous analysis of multiple elements at extremely low levels and is the most sensitive elemental analysis method among common ...

Analytical Chemistry Technical Report

[Chromatography Q & A]: What Methods are Available for LC/MS Analysis of Highly Polarized Analytes?

This article was written for No. 42 (October 2006), of Analytical Circle.

For columns used in LC/MS, highly versatile reverse-phase octadecyl-silica gel (C18, ODS) is a mainstay packing agent. This ODS packing agent, however, has difficulty in separating a particular type o...

Analytical Chemistry Technical Report

[Technical Report] Analysis of Veterinary Drugs, Tiamulin and Robenidine, Using Wakopak® Wakosil-II 5SIL-AQ

This article was written by Ms. Kimiko Yoshida, FUJIFILM Wako Pure Chemical Corporation, for Vol. 74 No. 3 (July 2006), of Wako Junyaku Jiho.
The content of this article is from the time of publication. It is not the latest information due to new knowledge and changes in regulatory rules after original publication.

Widespread proliferation of liquid chromatography-mass spectrometry (LC/MS) analysis has made LC/MS-compatible solvents, reagents, and analytical columns commercially available. For the analytical col...

Analytical Chemistry Technical Report

[Chromatography Q & A]: Change into Simple Analytical Condition Using Smaller Volume of Solvent; Change of Column Size from 4.6 mmφ to 3.0 mmφ

This article was written for No. 52 (March 2009), of Analytical Circle.

When the column size is changed from 4.6 to 3.0 mm in internal diameter (I.D.), and the flow rate is reduced by half, the solvent volume can be reduced. Although analysis time is not reduced, such cha...

Analytical Chemistry Technical Report

[Chromatography Q & A]: Connection Types of HPLC Column Wakopak®

This article was written for No. 71 (December 2013), of Analytical Circle

In the past, manufacturers of HPLC systems applied different specifications to connectors. In HPLC systems using stainless-steel pipes and connectors, the first column determined specifications of the...

We will prohibit unauthorized reprinting, duplication etc. of the text, images etc. of this site.

+49-2131-311-271

Reception hours: Mon-Fri 9:00 - 15:00 (CET)For other hours than the above, please contact us via the inquiry form.