Fujifilm Wako supplies a wide range of solvents that can be used in the analysis of pesticide and veterinary drug residues.​

Solvent for Pesticide Residue And Polychlorinated Biphenyl Analysis (Concentratin 300/5000 series)​

Solvents that have passed strict specification tests are required for the microanalysis of pesticides, PCBs, etc.​
These products are solvents guaranteed by 300- and 5,000-fold concentration with strict quality specifications. They are suitable for the ultralow volume analysis of pesticide residues.​

  • ECD-GC : Impurities in the solvent equal to or less than 1/2 of the peak height of γ-BHC (organochlorine pesticide) at 20 pg
  • FPD-GC : Impurities in the solvent equal to or less than 1/5 of the peak height of MPP (organophosphate pesticide) at 0.5 ng​
  • Specification values are different for some solvents. Please check the latest version of product specifications before purchase.​

Solvent for HPLC​

These high-purity solvents are guaranteed against changes in the refractive index due to water, peroxides, non-volatile materials, and impurities in the solvent as well as ultraviolet absorption, fluorescent substances, etc. Additionally, these products are filtered through a 0.45 μm membrane filter in the final process to minimize the clogging of pipelines and filters. This results in low column loading, allowing highly reproducible data to be obtained.​

Solvent for LC/MS​

Specifically designed for LC/MS analysis, the content of trace impurities from HPLC solvents has been further reduced. Since it has been confirmed that these solvents have low baseline in LC/MS analysis compatibility tests and are also guaranteed with regard to particles (micro particles), the load on columns can be minimized.​

For research use or further manufacturing use only. Not for use in diagnostic procedures.

Product content may differ from the actual image due to minor specification changes etc.

If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.


Hours of Operation: 8:00 - 17:00 (EST)For other hours than the above, please contact us via the inquiry form.