Wakopak® Ultra Series (C18)
Wakopak® Ultra C18 is an ODS column with improved packing agent surface treatment technology and reduced residual silanol groups to the extreme. It is also highly durable in basic eluents above pH 9 that were difficult with other Wakopak® C18 series.
Wakopak® Ultra C18-2 has a particle size of 2 μm for UHPLC.
Wakopak® Ultra C18-5 with 5 μm particle size and Ultra C18-3 with 3 μm particle size which has a same HPLC performance as Wakopak® Ultra C18-2. So it is possible to transfer the analytical conditions easily from HPLC to UHPLC.
| Silica Gel | High-purity spherical silica gel |
|---|---|
| Average Particle Size | 2 µm, 3 µm, 5 µm |
| Specific Surface Area | 320 - 360 m2/g |
| Pore Size | 2 µm: 9.0-11.0 nm 3 µm,5 µm: 11.0-14.0 nm |
| Pore Volume | 2 µm: 0.80 - 0.90 mL/g 3 µm, 5 µm: 0.95 - 1.15 mL/g |
| Functional Group | Octadecyl group |
| Endcap | 〇 |
| Carbon Content | 15.0 - 16.5% |
| USP Code | L1 |
| Recommend pH Range | 1.5 - 10.0 |
Features
- Robust columns without deterioration
- The peak shape of basic compounds is sharp
- Available over a wide pH range (pH1.5-10)
- Available for UHPLC (Wakopak® Ultra C18-2)
Applications
Example of analysis in a basic eluent
-
HPLC Conditions Column Wakopak® Ultra C18-5、 4.6 mm x 150 mm Eluent 10 mM Sodium Tetraborate (pH9.2)/CH3OH=62/38 (v/v) Flow Rate 1.0 mL/min. at 45℃ Detection 510 nm Sample 1. Cobalt-PAR Complex (Co-PAR) 2. Unreacted-PAR reagent (PAR) Inject. Vol 10 μL
Example of separation of basic compounds
-
Common Conditions Eluent CH3CN/10 mM K2HPO4 (pH7.6)=70/30 (v/v) Detection UV 254 nm Sample 1. Uridine 2 mg, 2. Procainamide HCl 5 mg, 3. Phenol 20 mg, 4. 2,4,6-Trimethylpyridine 10 μL, 5. Methyl benzoate 50 μL in 100 mL 30% CH3CN Inject. Vol 1 μL
Example of analysis of non-ionic surfactants
"Wakopak® Ultra C18" is available over a wide pH range by improving the surface treatment technology of the silica gel packing agent. Maintenance of at least 85% of the initial retention performance was confirmed, even after 1,500 hours or more of continuous use under below analytical conditions (using an eluent with a pH of 9.2), and the product can be used continuously.
Product List
- Open All
- Close All
Column for HPLC: Wakopak® Ultra C18-3 (Pore Size: 3 μm)
*Made to order product
Column for HPLC: Wakopak® Ultra C18-5 (Pore Size: 5 μm)
*Made to order product
Column for HPLC: Wakopak® Ultra C18-2 (Pore Size: 2 μm)
For research use or further manufacturing use only. Not for use in diagnostic procedures.
Product content may differ from the actual image due to minor specification changes etc.
If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.
The prices are list prices in Japan.Please contact your local distributor for your retail price in your region.