Reagents for Ion Chromatography (JCSS Standard Solution, Mixture Standard Solution, Eluent)

Ion chromatography is a method of separating and quantifying ions in a sample solution using a column packed with ion exchanger as the stationary phase and an eluent as the mobile phase. Because ion chromatography can simultaneously and sensitively quantify a wide variety of ions with different valence, it is widely used for quality control of environmental water, wastewater, air, pharmaceutical and foods.

Quantitative determination in ion chromatography is performed by comparing the peak areas of standard solutions and samples, utilizing the characteristic of peaks of the same ion appearing at the same retention time under certain analytical conditions. Therefore, the quality of the standard solutions used in ion chromatography is extremely important.
Fujifilm Wako offers a variety of standard solutions for ion chromatography, including JCSS standard solutions, which are SI traceable certified reference materials (CRM) accredited by IAJapan and traceable to national measurement standards, and ion chromatography standard solutions whose concentration is guaranteed by Fujifilm Wako. In addition, Fujifilm Wako also offers pre-prepared eluents that can be used simply by dilution.

What is JCSS?

JCSS (Japan Calibration Service System) is the traceability system on the Japanese Measurement Law for the production of certified reference materials (CRM). Fujifilm Wako is accredited by the Minister of Economy, Trade and Industry of Japan as a calibration organization (JCSS registered business operator) for pH, metal (element), and ion standard solution, and produces JCSS standard solutions. Each JCSS standard solution is accompanied by a "calibration certificate" with the international MRA (Mutual Recognitioin Arrangement)1) / JCSS mark, which certifies that the product is traceable to the national measurement standards (SI traceable).

1) International Mutual Recognition of ILAC (International Laboratory Accreditation Cooperation) / APAC (Asia Pacific Accreditation Cooperation Incorporated)

■Traceability of JCSS

01833_img02R2.png

Single Standard Solutions

Code Product name Composition Concentration (mg/L) Grade
024-15331 Bromide Ion Standard Solution Br- KBr in H2O 1,000 JCSS [CRM]
024-18913 Bromate Ion Standard Solution BrO3- KBrO3in H2O 2,000 JCSS [CRM]
031-13321 Calcium Ion Standard Solution Ca2+ Ca(NO3)2・4H2O in 0.02 mol/L HNO3 1,000 for Ion Chromatography
034-26121 Calcium Standard Solution Ca2+ CaCO3 in 5 w/w%HNO3 1,000 for ICP Analysis [CRM]
038-16153 Chloride Ion Standard Solution Cl- NaCl in H2O 1,000 JCSS [CRM]
036-25581 Chlorite Ion Standard Solution ClO2- NaClO2 in H2O 1,000 JCSS [CRM]
031-24953 Chlorate Ion Standard Solution ClO3- NaClO3 in H2O 1,000 JCSS [CRM]
066-03401 Fluoride Ion Standard Solution F- NaF in H2O 1,000 JCSS [CRM]
163-13991 Potassium Ion Standard Solution K+ KNO3 in 0.02 mol/L HNO3 1,000 for Ion Chromatography
162-28351 Potassium Standard Solution K+ KNO3 in H2O 1,000 for ICP Analysis
126-03391 Lithium Ion Standard Solution Li+ LiNO3 in 0.02 mol/L HNO3 1,000 for Ion Chromatography
127-06741 Lithium Standard Solution Li+ LiNO3 in 5 w/w% HNO3 1,000 for ICP Analysis
135-09761 Magnesium Ion Standard Solution Mg2+ Mg(NO3)2・6H2O in 0.02 mol/L HNO3 1,000 for Ion Chromatography
134-19481 Magnesium Standard Solution Mg2+ MgO in 5 w/w%HNO3 1,000 for ICP Analysis [CRM]
193-09621 Sodium Ion Standard Solution Na+ NaNO3 in 0.02 mol/L HNO3 1,000 for Ion Chromatography
198-18581 Sodium Standard Solution Na+ NaNO3 in H2O 1,000 for ICP Analysis [CRM]
019-15461 Ammonium Ion Standard Solution NN4+ NH4NO3 in 0.02 mol/L HNO3 1,000 JCSS [CRM]
146-06453 Nitrite Ion Standard Solution NO2- NaNO2 in H2O 1,000 JCSS [CRM]
147-09901 Nitrite Nitrogen Standard Solution NO2- NaNO2 in H2O 1,000 (as N) JCSS [CRM]
149-06443 Nitrate Ion Standard Solution NO3- NaNO3 in H2O 1,000 JCSS [CRM]
144-09891 Nitrate Nitrogen Standard Solution NO3- NaNO3 in H2O 1,000 (as N) JCSS [CRM]
164-17463 Phosphate Ion Standard Solution PO43- NaH2PO4 in H2O 1,000 JCSS [CRM]
167-28921 Phosphorus Standard Solution PO43- H3PO4 in H2O 1,000 (as P) JCSS [CRM]
198-10823 Sulfate Ion Standard Solution SO42- Na2SO4 in H2O 1,000 JCSS [CRM]
191-19051 Sulfur Standard Solution SO42- H2SO4 in H2O 1,000 (as S) JCSS [CRM]

Mixture Standard Solutions

Composition of mixture standard solutions

JCSS for Ion Chromatography
Composition (mg/L) Anion Mixture Standard Solution 1 5 Anion Mixture Standard Solution Multianion Standard Solution 3 Multication Standard Solution I Multication Standard Solution II Multication Standard Solution III
Br- 100 - 50 - - -
Ca2+ - - - 100 - 50
Cl- 20 200 10 - - -
ClO3- - 100 - - - -
F- 20 100 - - - -
K+ - - - - 100 50
Li+ - - - - - 5
Mg2+ - - - 100 - 30
Na+ - - - 100 100 20
NH4+ - - - - 100 25
NO2- 100 10 (as N) 50 - - -
NO3- 100 100 (as N) 50 - - -
PO43- 200 - - - - -
SO42- 100 - 100 - - -
Solvent H2O H2O H2O 0.02 mol/L HNO3 0.02 mol/L HNO3 0.02 mol/L HNO3

Anion mixture standard solutions

Anion Mixture Standard Solution 1

Ion Chromatogram
01833_img03.png
Peak No. Ion Peak No. Ion Peak No. Ion
1 F- 4 Br- 6 PO43-
2 Cl- 5 NO3- 7 SO42-
3 NO2-
Analysis conditions

[Instrument]
Thermo ICS-5000+

[IC]

Column : Dionex IonPac™ AS12A
Guard column : Dionex IonPac™ AG12A
Column temperature : 35℃
Eluent : 2.7 mmol/L Na2CO3 – 0.3 mmol/L NaHCO3
Flow rate : 1.5 mL/min.
Detector : Electric conductivity

5 Anion Mixture Standard Solution

Ion Chromatogram
01833_img04.png
Peak No. Ion Peak No. Ion Peak No. Ion
1 F- 3 NO2- 5 NO3-
2 Cl- 4 ClO3-
Analysis conditions

[Instrument]
Thermo ICS-5000+

[IC]

Column : Dionex IonPac™ AS23
Guard column : Dionex IonPac™ AG23
Column temperature : 35℃
Eluent : 4.5 mmol/L Na2CO3 – 0.8 mmol/L NaHCO3
Flow rate : 1.0 mL/min.
Detector : Electric conductivity

Multianion Standard Solution 3

Ion Chromatogram
01833_img05.png
Peak No. Ion Peak No. Ion Peak No. Ion
1 Cl- 3 Br- 5 SO42-
2 NO2- 4 NO3-
Analysis conditions

[Instrument]
Thermo ICS-5000+

[IC]

Column : Dionex IonPac™ AS12A
Guard column : Dionex IonPac™ AG12A
Column temperature : 35℃
Eluent : 2.7 mmol/L Na2CO3 – 0.3 mmol/L NaHCO3
Flow rate : 1.5 mL/min.
Detector : Electric conductivity

Cation mixture standard solutions

Multication Standard Solution I

Ion Chromatogram
01833_img06.png
Peak No. Ion Peak No. Ion Peak No. Ion
1 Na+ 2 Mg2+ 3 Ca2+
Analysis conditions

[Instrument]
Thermo ICS-5000+

[IC]

Column : Dionex IonPac™ CS12A
Guard column : Dionex IonPac™ CG12A
Column temperature : 35℃
Eluent : 20 mmol/L CH3SO3H
Flow rate : 1.0 mL/min.
Detector : Electric conductivity

Multication Standard Solution II

Ion Chromatogram
01833_img07.png
Peak No. Ion Peak No. Ion Peak No. Ion
1 Na+ 2 NH4+ 3 K+
Analysis conditions

[Instrument]
Thermo ICS-5000+

[IC]

Column : Dionex IonPac™ CS12A
Guard column : Dionex IonPac™ CG12A
Column temperature : 35℃
Eluent : 20 mmol/L CH3SO3H
Flow rate : 1.5 mL/min.
Detector : Electric conductivity

Multication Standard Solution III

Ion Chromatogram
01833_img08.png
Peak No. Ion Peak No. Ion Peak No. Ion
1 Li+ 3 NH4+ 5 Mg2+
2 Na+ 4 K+ 6 Ca2+
Analysis conditions

[Instrument]
Thermo ICS-5000+

[IC]

Column : Dionex IonPac™ CS12A
Guard column : Dionex IonPac™ CG12A
Column temperature : 35℃
Eluent : 20 mmol/L CH3SO3H
Flow rate : 1.0 mL/min.
Detector : Electric conductivity

Eluents

Pre-prepared eluent for cation and anion analysis. Dilute 100 times with water at the time of use.

Product Code Product Name Concentration (mg/L) Volume
For anion analysis
091-03231 Ion Chromato-Eluent A-D 0.24 mol/L Na2CO3- 0.3 mol/L NaHCO3 1 L
For monovalent cation analysis
095-03251 Ion Chromato-Eluent C 0.1 mol/L HNO3 aq. 1 L
For monovalent and divalent cation analysis
131-12551 2 mol/L Methanesulfonic Acid Solution 2 mol/L CH3SO3H aq. 100 mL

Product List

  • Open All
  • Close All

Anion single standard solutions

Anion mixture standard solutions

Cation single standard solutions

Cation mixture standard solutions

Eluent for anion analysis

Eluent for monovalent cation analysis

Eluent for monovalent and divalent cation analysis

Related Product List

  • Open All
  • Close All

Metal Standard Solution (JCSS)

Metal Standard Solution (for Atomic Absorption Spectrochemical)

pH Standard Solution

For research use or further manufacturing use only. Not for use in diagnostic procedures.

Product content may differ from the actual image due to minor specification changes etc.

If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.

The prices are list prices in Japan.Please contact your local distributor for your retail price in your region.

Please contact us via the inquiry form.