Presep® Multi-layer Silica Gel & Active Carbon-impregnated Silica Gel

SPE Column for Dioxin Analysis in accordance with JIS

For dioxins analysis, samples are cleaned up by multi-layer silica gel column chromatography, activated alumina chromatography or activated carbon silica gel chromatography. These cartridge columns are packed with solid-phase carriers for the treatment.

Features

Designed according to JIS K 0311 (Method for determination of dioxins and coplanar PCB in exhaust gas) and JIS K 0312 (Method for determination of dioxins and coplanar PCB in industrial water and waste water)

  • Column plug and moisture-proof aluminum packaging bag prevent quality deterioration during storage.
  • Ideal for analysis of dioxins* (Blank test for dioxins and coplanar PCB by high-resolution GC/MS has been implemented.)
  • Fraction test for dioxins and coplanar PCB has been carried out (Presep® Alumina, Activated DX).
  • Less eluent needed by applying reflux extraction (Presep® Active Carbon-impregnated Silica Gel Reverse Column)

    *Except Presep® Multi-layer Silica Gel

Dioxin Analysis Flow

00993_img01.png

Multi-layer Silica Gel

00993_img02.png

Activated Carbon-impregnated Silica Gel

How to set-up for normal phase

00993_img03.png

How to set-up for reverse column

00993_img04.png

Suitability for Dioxin Determination

Dibenzo-p-dioxane Specification
(pg/cartridge)
Dibenzo-p-furan Specification
(pg/cartridge)
Co-PCB Specification
(pg/cartridge)
Tetra-CDDs 1 Tetra-CDFs 1 Tetra-CBs 10
Penta-CDDs 1 Penta-CDFs 1 Penta-CBs 10
Hexa-CDDs 1 Hexa-CDFs 1 Hexa-CBs 10
Hepta-CDDs 5 HeptaCDFs 5 Hepta-CBs 5
Octa-CDD 5 Octa-CDF 5

Performance of Fractionation

Detection of dioxins and non-ortho Co-PCB in the toluene fraction (recovery rate: left, amount of the solvent : right)

  • 00993_img05.png
  • 00993_img06.png
  1. Charge 1 mL of the sample to the upper layer of the Presep Active Carbon-impregnated Silica Gel (Reverse Column). [14 species Co-PCB (each 10 ng/mL), 1,3,6,8-TCDF, OCDD (15 ng/mL hexane solution)]
  2. Wash the wall of the glass tube with a small amount of hexane (0.5 mL) and leave it for 10 minutes.
  3. Elute with hexane (50 mL) and 25 v/v% dichloromethane/hexane (150 mL). After reversing the column, elute with toluene (100 mL ※10 mL fractions×10)

Product List

  • Open All
  • Close All

Related parts

Related Product List

  • Open All
  • Close All

Pretreatment reagent

Analytical column

Author: Y. Higai

For research use or further manufacturing use only. Not for use in diagnostic procedures.

Product content may differ from the actual image due to minor specification changes etc.

If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.

Please contact us via the inquiry form.