2nd Fluid for disintegration test, pH 6.8 (×10)

for Disintegration and Dissolution Test

Manufacturer :: FUJIFILM Wako Pure Chemical Corporation

Storage Condition :: Keep below 25 degrees C.

Structural Formula
Label
Packing

SDS

Comparison	Product Number	Package Size	Price	Inventory
	Distributor 063-06451 Barcode No 4548995038081	5L	List Price 110.00 USD	In stock in Japan	Certificate of Analysis

Inquiry

Document
Application
Overview / Applications
Property
Manufacturer Information
Alias
Related Information

Document

SDS

Product Specification Sheet

Spectral Data

Certificate of Analysis

Calibration Certificate

Application

Overview / Applications

Outline	A test solution for disintegration and dissolution tests of drugs. This is a ready-to-use reagent produced under strict management. The product is a 10-fold concentrated preparation based on the following ratios described in the Japanese Pharmacopoeia, General Tests, Reagents and Test Solutions, 2nd Fluid for disintegration test. Add 118 mL of 0.2 mol/L sodium hydroxide test solution and water to 250 mL of 0.2 mol/L potassium dihydrogen phosphate test solution, to yield a 1000 mL solution. The resulting solution is colorless and clear, and its pH is about 6.8.

Outline

A test solution for disintegration and dissolution tests of drugs.
This is a ready-to-use reagent produced under strict management.
The product is a 10-fold concentrated preparation based on the following ratios described in the Japanese Pharmacopoeia, General Tests, Reagents and Test Solutions, 2nd Fluid for disintegration test.

Add 118 mL of 0.2 mol/L sodium hydroxide test solution and water to 250 mL of 0.2 mol/L potassium dihydrogen phosphate test solution, to yield a 1000 mL solution. The resulting solution is colorless and clear, and its pH is about 6.8.

Property

Appearance	Colorless clear liquid
pH	6.75 - 6.85(25 degrees C)(1->10)

Manufacturer Information

Alias

Related Information

Product List

Product Name
1st Fluid for disintegration test, pH 1.2/1st Fluid for dissolution test, pH 1.2	for Disintegration and Dissolution Test
2nd Fluid for disintegration test, pH 6.8	for Disintegration and Dissolution Test
2nd Fluid for dissolution test	for Disintegration and Dissolution Test
0.05 mol/L Acetic Acid-Sodium Acetate Buffer Solution, pH 4.0	for Disintegration and Dissolution Test
Diluted McIlvaine Buffer Solution, pH 4.5 Discontinued	for Disintegration and Dissolution Test
Diluted McIlvaine Buffer Solution, pH 6.8	for Disintegration and Dissolution Test
Diluted McIlvaine Buffer Solution, pH 7.5	for Disintegration and Dissolution Test
1st Fluid for disintegration test, pH 1.2/1st Fluid for dissolution test, pH 1.2 (×10)	for Disintegration and Dissolution Test
Phosphate Buffer Solution, pH 6.8 (×10)	for Disintegration and Dissolution Test
Diluted McIlvaine Buffer Solution, pH 3.0 (×10)	for Disintegration and Dissolution Test
Diluted McIlvaine Buffer Solution, pH 4.0 (×10)	for Disintegration and Dissolution Test
Diluted McIlvaine Buffer Solution, pH 5.0 (×10)	for Disintegration and Dissolution Test

For research use or further manufacturing use only. Not for use in diagnostic procedures.

Product content may differ from the actual image due to minor specification changes etc.

If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.