CLPA series

Binders for LIB

This binder has been developed for use with high capacity Si type anodes. Si type is the emerging anode technology for next generation lithium ion rechargeable batteries. CLPA inhibits the collapse of the negative Si electrode that is caused by the repeated volume change during charge/discharge.

00212_img01.jpg

The number indicates the relative value of the crosslinking density.

Performance

Performance of CLPA on Si and graphite composite electrode

00212_img02.jpg

Komaba, S. et al: Journal of The Electrochemical Society, 162 (12) A2245-A2249 (2015).

Property

Property of CLPA-H series

00212_img03.jpg

Higher crosslinking density gave higher viscosity/thixotropy.

Effect

Effect of CLPA

00212_img04.jpg

00212_img05.jpg

  • Our CLPA series are developed for Si system anode.
  • Our recommend is 80% partial neutralization of CLPA-H based on our battery test.
  • Method to making CLPA-H solution is; 1) dissolve CLPA-H in deionized water and 2) adjust neutrally degrees by NaOH solution.

Product List

  • Open All
  • Close All

Author: H. Mizuta

For research use or further manufacturing use only. Not for use in diagnostic procedures.

Product content may differ from the actual image due to minor specification changes etc.

If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.

+49-2131-311-271

Reception hours: Mon-Fri 9:00 - 15:00 (CET)For other hours than the above, please contact us via the inquiry form.