Tetrahydrofuran, with Stabilizer

for HPLC

Specification Assay :: 99.5+% (Capillary GC)

Manufacturer :: FUJIFILM Wako Pure Chemical Corporation

Storage Condition :: Protect from light.

CAS RN^® :: 109-99-9
Molecular Formula :: C4H8O
Molecular Weight :: 72.11

GHS :

Close
Close

Close
Close

Close

Structural Formula
Label
Packing

SDS

Comparison	Product Number	Package Size	Price	Inventory
	Distributor 200-19391 Barcode No 4548995014412	1L	List Price JPY 6,800	In stock in Japan	Certificate of Analysis
	Distributor 206-19393 Barcode No 4548995014429	3L	List Price JPY 15,000	In stock in Japan	Certificate of Analysis

Please check here for notes on products and prices.

Inquiry

Document
Application
Overview / Applications
Property
Manufacturer Information
Alias
Same CAS list
Related Information

Document

SDS

Product Specification Sheet

Spectral Data

Certificate of Analysis

Calibration Certificate

Application

Overview / Applications

Outline	This product is for research use only. Do not administer it to human. This HPLC solution is primarily used for gel permeation chromatography. This product contains butylated hydroxytoluene (BHT) at a concentration of about 0.03% as a stabilizer to prevent tetrohydrofuran (THF) oxidation from oxidizing and degrading the column. Analysis at a refractive index or 300 nm or higher is recommended because of the product's tendency to absorb UV wavelengths of 250 to 300 nm. Use THF without a stabilizer if you intend to perform detection within the UV spectrum.

Outline

This product is for research use only. Do not administer it to human.

This HPLC solution is primarily used for gel permeation chromatography.
This product contains butylated hydroxytoluene (BHT) at a concentration of about 0.03% as a stabilizer to prevent tetrohydrofuran (THF) oxidation from oxidizing and degrading the column. Analysis at a refractive index or 300 nm or higher is recommended because of the product's tendency to absorb UV wavelengths of 250 to 300 nm. Use THF without a stabilizer if you intend to perform detection within the UV spectrum.

Property

Appearance	Colorless clear liquid
Boiling Point	about 65 degrees C
Density	0.884 - 0.889g/mL(20 degrees C)
Refractive Index	1.406 - 1.409(20 degrees C/D)

Manufacturer Information

Alias

Same CAS list

Related Information

Product List

Product Name
Acetone	for HPLC
Acetonitrile	for HPLC
Benzene Discontinued	for HPLC
1-Butanol	for HPLC
t-Butyl Methyl Ether	for HPLC
Chloroform	for HPLC
Chloroform, Amylene added	for HPLC
Cyclohexane	for HPLC
o-Dichlorobenzene	for HPLC
Dichloromethane	for HPLC
N,N-Dimethylformamide	for HPLC
1,4-Dioxane	for HPLC
Distilled Water	for HPLC
Ethanol (99.5)	for HPLC
Ethyl Acetate	for HPLC
Heptane	for HPLC
1,1,1,3,3,3-Hexafluoro-2-propanol	for HPLC
Hexane	for HPLC
Methanol	for HPLC
1-Propanol	for HPLC
2-Propanol	for HPLC
Tetrahydrofuran, Stabilizer Free	for HPLC
Toluene	for HPLC
0.1vol% Trifluoroacetic Acid - Acetonitrile	for HPLC
2,2,4-Trimethylpentane	for HPLC

Content

[Chromatography Q & A] What is a difference in use of acetonitrile and methanol, which are used frequently in reverse-phase HPLC analysis? Wako Blog

For research use or further manufacturing use only. Not for use in diagnostic procedures.

Product content may differ from the actual image due to minor specification changes etc.

If the revision of product standards and packaging standards has been made, there is a case where the actual product specifications and images are different.

The prices are list prices in Japan.Please contact your local distributor for your retail price in your region.